PEACH models magnetic tattoo pen high-end tattoo tools professional intelligent digital display wireless tattoo machine

Stroke Adjustment:

Gently rotate the stroke marking section to the left/right for 6-position needle stroke
adjustment.(Stroke Gear:2.3mm 2.7mm 3.2mm 3.8mm 4.2mm 4.5mm)

Key Operation:

1,When the machine is turned off,long press K2 to turn on the machine:without
Jump-start mode;double click K2 to turn on the machine:with Jump-start mode;

2.When the machine is turned on,long press K2 to turn off the machine,and the
machine enters the low-power hibernation state.

3.When the machine is turned on and the motor is turned on,short press or long
press K1/K3 to increase or decrease the current output voltage value.

4.When the machine is turned on and the motor is off,short press K1/K3 to switch 3
groups of memory voltages cyclically.

5.When the machine is turned on and the motor is off,long press K1/K3 to set the
current memory voltage value.

Screen Display:
A:The motor turns on the operating time display.(Warning message display,please
see Protective Tips description)

B:Current output voltage value.

C:Battery power remaining percentage value.

D:Battery output status:Orange indicates battery output is on,Gray indicates battery
output is off.

E:Output frequency monitoring value.(Unit:HZ RPM /60)

F:Motor machine operating current detection value.(Unit:mA,Can be used as a
reference for needle strength)

G:Jump-start sign.

H:Memory voltage mode:M1-SECANT,M2-SHADING,M3-CUSTOM.

I:Battery symbols.(White:power >=10%;Red:power <10%.)

Protection Tips:

LOW POWER:Battery low battery protection alert.
OVER LODAD:Motor machine overload protection alert.
SHORT OUT:Motor machine short circuit protection alert.
Note:When the above protection is triggered,the above message will be shown at the
top of the display.